HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Server Configuration and Utilities
8-4 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:17 AM
• Utility Language
For a complete explanation of RBSU features and functions, refer to the ROM-Based
Setup Utility User Guide on the Documentation CD.
System Options
The System Options menu is for overall system configuration settings. The
following selections are included in this menu:
• OS Selection prompts you to select the operating system. This option
automatically selects appropriate advanced settings for the selected operating
system and must be set before the operating system installation.
• Serial Number enables you to type in the server serial number.
• Embedded COM Ports A and B enables you to either enable the embedded
COM ports A and B at the specified resource setting or disable the option.
• Embedded LPT Port enables you to either enable the embedded parallel port at
the specified resource setting or disable the option.
• Integrated Diskette Controller enables you to enable or disable the floppy
controller.
• NUMLOCK Power-On State enables you to enable or disable the keyboard
NUMLOCK feature at server startup.
• Embedded NIC PXE Support enables the user to enable or disable PXE
support for the NIC.
• Diskette Write Control enables you to configure the write control of the
removable media drive. The options are read and write or read only.
• Diskette Boot Control enables you to have the system boot from the removable
media device.
• Advanced Memory Protection enables you to choose one of the following
memory modes:
— Advanced ECC support sets the system to use the standard paired DIMM
configuration.