HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Server Configuration and Utilities
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 8-3
HP CONFIDENTIAL
Writer: Wendy Wing File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:17 AM
• To exit RBSU, press the Esc key, and then press the F10 key at the prompt.
• To return to the previous menu, press the Escape key.
Saving RBSU Configuration Settings
RBSU automatically saves settings when you press the Enter key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a
selected setting, you must select a different setting and press the Enter key.
Using RBSU
RBSU does not run automatically. The first time the server is powered-up, the system
defaults to Windows 2000 and waits temporarily so you can select a different
operating system by using RBSU. Press the F9 key to enter RBSU. While you are in
RBSU, press any key to return to the RBSU main menu, or exit RBSU by pressing
the Esc key, then pressing the F10 key at the prompt.
NOTE: Most of the features in RBSU are not required in the setup of the server. The options
in this utility are designed to assist with specific server configuration issues.
RBSU is divided into a series of menu selections designed to configure specific areas
of the system. The primary menus are as follows:
• System Options
• PCI Devices
• Standard Boot Order (IPL)
• Boot Controller Order
• Date and Time
• Automatic Server Recovery
• Server Passwords
• Server Asset Text
• Advanced Options