HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Cabling the Server
7-6 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: h-ch7 Cabling the Server
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 9/5/02 3:07 PM
Internal Cabling Configurations
The following sections describe internal signal cabling configurations for the server
hardware options.
Internal Drives and Storage Devices
Internal storage devices in the server require minimum cabling, as described in the
following section, and include:
• Storage devices in the removable media bays
• DVD drive in the CD-ROM drive bay
Storage Devices in the Removable Media Bays
The server supports installation of SCSI or IDE storage devices into the removable
media bays. Devices supported include:
• SCSI devices:
— Digital Linear Tape (DLT) drive
— Digital Audio Tape (DAT) drive
— Advanced Intelligent Tape (AIT) drive
— Two-bay hot-plug SCSI drive cage
• IDE devices:
— CD-ROM drive
— DVD drive