HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing the Rack Server
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 5-23
HP CONFIDENTIAL
Writer: Wendy Wing File Name: f-ch5 Installing the Rack Server.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:58 AM
Use the following figure and table to identify connectors on the rear panel of the rack server.
Figure 5-18: Rear panel connectors and components
(rack server)
Table 5-2: Rear Panel Connectors and Components (Rack Server)
Item Description Item Description
1 Mouse connector 10 Hot-plug power supply 2
2 Serial connector A 11 Torx T-15 tool
3 Parallel connector 12 Unit Identification (UID) switch and LED
4 Embedded NIC connector (RJ-45) 13 USB connectors
5 Locking latch 14 Video connector
6 VHDCI SCSI connector * 15 Serial connector B
7 PCI-X Hot Plug expansion slots 16 Hot-plug power supply 3 (redundant)
8 PCI-X non-hot plug expansion slots 17 Keyboard connector
9 Hot-plug power supply 1
* In the standard shipping configuration, the VHDCI SCSI connector is not connected. To connect
the VHDCI SCSI connector, refer to “External Devices” in Chapter 3, “Installing Hardware Options.”