HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 3-63
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
4. Lift the slate-blue release latch (1) and slide out a removable media bay
blank (2).
Figure 3-53: Removing the media bay blanks
(tower model)
NOTE: If you plan to install a full-height device, you must remove both media bay blanks.
5. If you remove the lower removable media bay blank, remove the terminated
multi-drop SCSI cable bundled in the bay blank and store it for later use.
6. Locate and remove the Torx T-15 tool. Refer to “Locating and Removing the
Torx T-15 Tool” in this chapter.