HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 3-61
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
4. Align the hot-plug universal tape drive with the drive bays and slide the tape
drive into the drive bays until the release latch snaps into place.
Figure 3-52: Installing the universal hot-plug tape drive
5. Be sure that the tape drive LED on the front of the tape drive is illuminated
green, indicating that the system is functioning properly. For detailed information
on LEDs, refer to Appendix C, “System LEDs and Switches.”
6. If any of the LEDs indicates an error, refer to Appendix D, “Troubleshooting,” or
refer to the troubleshooting guide for instructions.
For more information regarding installing the hot-plug universal tape drive, refer to
the installation documentation provided with the drive.