HP ProLiant ML570 Generation 2 Server Memory Installation Guide

Memory
Removing a DIMM
To remove a DIMM:
1. Remove the memory board. Refer to “Removing a Memory Board” in this
chapter.
2. Place the memory board on a level surface.
3. Open the DIMM slot latches (1) to eject the DIMM from the DIMM slot (2).
Figure 1-5: Removing a DIMM
HP ProLiant ML570 Generation 2 Server Memory Installation Guide 1-27
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: b-ch1 Memory.doc
Codename: Seabiscuit Part Number: 279987-003 Last Saved On: 5/8/03 8:58 AM