HP ProLiant ML500 Series Generation 2 Server Memory Installation Guide

Error Messages
2-2 HP ProLiant ML500 Series Generation 2 Server Memory Installation Guide
HP CONFIDENTIAL
Writer: Jim Yurick File Name: c-ch2 Error Messages.doc
Codename: Time Bandit Part Number: 279987-002 Last Saved On: 8/22/02 2:16 PM
Table 2-1: POST Error Messages
Error Code Audible
Beeps
Probable Source of
Problem
Action
207 - Invalid Memory
Configuration - Unsupported
DIMM in Board X, DIMM X. Only
Registered DDR DIMMs are
Supported.
1 long,
1 short
Unregistered DIMMs Install registered
PC1600 ECC DDR
SDRAM DIMMs.
207 - Invalid Memory
Configuration - Unsupported
DIMM in Board X, DIMM X.
Insufficient Timings on DIMM.
1 long,
1 short
Insufficient DIMM
timings
Install registered
PC1600 ECC DDR
SDRAM DIMMs.
207 - Invalid Memory
Configuration - Mismatched
DIMMs within DIMM Bank.
Memory in Board X, Bank X Not
Utilized.
1 long,
1 short
DIMMs within a bank
are mismatched or
missing, or memory
board 1 is missing.
Install correctly
matched DIMMs.
209 - Online Spare Memory
Configuration - Board 1, Bank D
is invalid.
1 long,
1 short
Online spare bank is
configured incorrectly.
Be sure that DIMMs in
the online spare bank
are populated
correctly.
209 - Online Spare Memory
Configuration - No valid banks
for online spare.
1 long,
1 short
Only the online spare
bank is populated.
Install DIMMs in at
least bank A, board 1.
209 - Mirror Memory
Configuration - DIMMs on both
boards do not match.
1 long,
1 short
Memory boards are not
populated identically,
or a memory board is
missing.
Be sure that two
memory boards are
installed and that
DIMMs are populated
correctly.
209 - Mirror Memory
Configuration - Single-Board
Mirror DIMMs do not match.
1 long,
1 short
Mirrored banks are not
populated identically,
or memory board 1 is
missing.
Be sure mirrored
banks are populated
identically and that
only memory board 1
is installed.
209 - Mirror Memory
Configuration - Board 2 present
in Single-Board Mirror.
1 long,
1 short
A second memory
board is installed in the
single-board mirrored
memory configuration.
Remove memory
board 2.