Compaq ProLiant ML530 Setup and Installation Guide

Server Installation 3-9
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: d-ch3 Installation.doc Last Saved On: 6/15/00 9:02 AM
13. Remove the screw from each center of the lift handle clip and pull the
clips away from the server.
Figure 3-3. Removing lift handle clips
14. Close switch 3 of the system board configuration switches to change the
server from a tower model to a rack model.
on
1 23456
Figure 3-4. Changing system board configuration switch 3 to a rack position
15. Replace the access panel.