Compaq ProLiant ML530 Setup and Installation Guide

Installing Hardware Options 2-31

Compaq Confidential – Need to Know Required

Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:

Part Number: 139006-002 File Name: c-ch2 Installing Hardware.doc Last Saved On: 6/13/00 12:29 PM

Installing Hot-Plug Wide Ultra2 SCSI and

Wide Ultra3 SCSI Hard Drives

1. Locate a drive blank in an unused drive bay.

CAUTION: During server operation, it is necessary that unused drive bays

contain a drive blank to ensure proper air flow.

2. Remove a drive blank from the unused drive bay by pushing the

retaining clip inward

3. Pull the drive blank out .

Figure 2-26. Removing a drive blank from an unused drive bay