Compaq ProLiant ML530 Setup and Installation Guide

Index 13
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: j-index.doc Last Saved On: 6/26/00 1:16 PM
fan LED 2-43
ID numbers 2-24
knockouts 3-33, 5-3
Port A Controller 5-6
Port B Controller 5-7
support 1-5
SDRAM 1-3, 2-10
securing
mounting bracket
assembly 3-22
power cord 5-10
security, features 1-11
separate
bracket rail and component
rail 3-16
separation between the equipment
and receiver A-2
serial
connectors 2-5, 3-33, 5-3
interface control 1-11
series number A-1
server
automatic recovery 4-15
cover 2-4
faceplate 3-20
health logs 1-8
management and
configuration 1-8
management tool 4-18
performance 1-9
preparing for
rack-mounting 3-1
rack
model 3-33, 5-3
mounting bracket 3-14, 3-15
slide rail assembly 3-15
recovery, automatic 4-15
security 1-9
weight 2-6, 3-7, 3-11, 3-26
Server Fault Tolerance 1-6
Server Setup and Management
pack 3-2
service
loop, securing 5-10
providers 3-35
setting
default configuration 3-34
power-on defaults 4-6
shielded cables A-3
shipping bracket 3-12, 3-32
shut off 2-3, 5-9
shutdown, OS 4-21
shutting down, delay 2-3
side spacer cover 3-8
site preparation 3-1
slide rail
assembly 3-12, 3-14, 3-15
mounting brackets 3-12, 3-27
slot
latch 2-26
number 2-7
slot cover 2-26
Smart Array controller 5-5
Smart Controller 2-28
SmartStart 1-8, 4-7, 4-11
CD 4-1
configuration 3-2
creating system partition 4-7
device drivers
for IBM OS/2 4-15
for Novell NetWare 4-10
for SCO 4-14
Windows NT 4-11
Support Software CD 4-1
using 3-2
socket, Intel processor 2-5
software
and documentation 3-13
installation guidelines 4-3
Solaris 7 4-17
space requirements 3-2
spare drive 2-28
SSI hot-plug power supply 1-7
stabilize rack 3-10, 3-19
standard
features 1-3
SCSI configuration 5-9
standby switch position 3-34, 5-9
starting the system configuration
utility 4-4
static electricity B-1, B-2
static-dissipating work mat B-2