Compaq ProLiant ML530 Setup and Installation Guide

12 Compaq ProLiant ML530 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: j-index.doc Last Saved On: 6/26/00 1:16 PM
device 2-16
drive 1-4, 2-15, 2-16
drive bays 1-4
drive, installing 2-14
rails 2-14
removing
access panel 2-4
CD-ROM drive 2-19
component rail 3-15
DIMMs 4-9
diskette drive 2-18
drive C-4
blanking panel 2-31
cage blank 2-22
fan basket 2-17, 2-21
hot-plug
drive 2-28
drive fans 2-44
hard drive 2-32
power supply 2-37
SCSI hard drives 2-28
system fans 2-40, 2-41, 2-43
PCI boards 4-9
power 2-3
power supply blank 2-36
processor air baffle 2-6
removable media drive bay
blanks 2-15
server cover 2-4
side spacer cover 3-9
slot cover 2-26
tower front bezel 3-7
repaired 4-17
replace
battery A-7
drive C-4
replacement drive 2-28, 2-30, C-4
requirements
airflow 3-5
power 3-2
space 3-2
temperature 3-2
resource conflicts, resolving 4-3
restore
configuration 4-8
data 2-28
system configuration 4-8
retaining plate 3-29
RFI/EMI connector hoods A-3
RJ-45
network connector C-11
receptacle xi
ROM 1-6, 3-34
ROMPaq 4-1
S
safety
product A-4
rack server 3-26
SCI files 4-8
SCO
device drivers
from Compaq 4-14
manual installation 4-15
OpenServer and SCO
UnixWare device drivers
from Compaq 4-14
screw retaining plate 3-29
SCSI
A
bus 5-4
cable color 2-16, 2-23, 5-4
adapter 5-6
B
bus 5-4
cable color 2-16, 2-23, 5-4
bus termination 5-6
buses 5-4
cabling 2-16, 2-18, 2-20, 2-23,
5-3, 5-9
connector
A 2-5
B 2-5
controller 1-5, 5-3, 5-6
drive
cage, installing 2-20
factory configuration 5-9
fans 2-12
hot-plug fan 2-44
hot-plug drive
backplane 2-12