Compaq ProLiant ML530 Setup and Installation Guide

10 Compaq ProLiant ML530 Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: j-index.doc Last Saved On: 6/26/00 1:16 PM
spare drive 2-28
On-Site Limited Warranty 1-7
operating system
installing 4-4, 4-10
Novell NetWare 4-10
optimum environment 3-2
optional installation service 3-35
OS, automatic shutdown 4-21
OS/2 device drivers 4-15
outer bracket rail 3-14
out-of-band communication 1-10
output power A-7
overheat condition 4-20
overheating 1-6
overview server installation 3-1
P
parallel
interface control 1-11
port 2-5, 3-33, 5-3
partition
creating system 4-7
system 4-6
password
administrator 1-11
enable switch 2-9
PCF files 4-3
PCI
bus error 4-20
configuration files 4-3
removing boards 4-9
slots 2-5
Pentium III Xeon processor 1-1
peripheral connectors 3-33
plug 3-11
polarization A-7
port
parallel 2-5, 3-33, 5-3
VGA 2-5
video 2-5
POST error message 2-28
power
cabling 5-9
connector 2-5
cord 3-11, 5-9, 5-10, A-8
cord connector 3-33, 5-3
cord set A-8
cord, warning 2-3, 3-6
down the server 3-34
first applied 2-34
Off
server 3-34
storage system 2-28
on server 3-34
On/Standby switch 2-3, 2-33,
2-38, 3-35, 5-9
output, laser A-7
requirements 3-3
securing cord 5-10
status LED indicator 2-3
strips 3-3, 3-4
supplies, balancing 3-3
up the server 3-34
Power Down Manager 3-34
Power On/Standby switch 3-34
power supply
advanced features 1-7
delay 2-34
failure 2-35, 4-21
front panel status LED
indicator 2-33
installing 2-36
optional redundant 1-7
problem 2-33
redundant option 2-34
removing 2-37
standard 1-7
status LED indicator 2-33,
2-35, C-2, C-6, C-10
powering down, LEDs 3-35
Power-On Self-Test 4-4, 4-17
power-on, setting defaults 4-6
predictive failure C-4
Pre-Failure Warranty 1-7
prefailure, Insight Manager
alert 2-45
preparing
rack mounting brackets and
slide rail assemblies 3-14
server 3-1
printing the event list 4-19