Compaq ProLiant ML530 Setup and Installation Guide

Server Configuration and Utilities 4-15
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: e-ch4 Configuration and Utilities.doc Last Saved On: 7/18/00 1:51 PM
The features requiring device drivers are:
■ Compaq Ethernet/Token Ring Adapters
■ Automatic Server Recovery-2
■ Compaq ProLiant Storage System
Manual Installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Boot from the Compaq SmartStart and Support Software CD.
2. Select Manual Configuration.
3. Follow the instructions that display on the monitor. Create the EFS
diskettes when prompted.
IBM OS/2 Device Drivers from Compaq
Your server must have certain device drivers for some server options to
operate using IBM OS/2 Warp Server 4.0, IBM OS/2 Warp Server 4.0 SMP,
and OS/2 Warp Connect 3.0. These drivers are located on the Compaq
SmartStart and Support Software CD you received with your server. If you use
SmartStart to install your operating system, these drivers are loaded
automatically. Otherwise, you can use SmartStart to create an OS/2 Support
Software Diskette (SSD) from Compaq to support a manual installation of
OS/2.
For more information on these drivers, run the README.COM file in the root
directory of the OS/2 SSD from Compaq.
Manual Installation
If you choose not to let SmartStart configure the server, follow this procedure:
1. Boot from the Compaq SmartStart and Support Software CD.
2. Select Manual Configuration.
3. Follow the instructions that display on the monitor.