Compaq ProLiant ML530 Setup and Installation Guide

Server Configuration and Utilities 4-5
Compaq Confidential – Need to Know Required
Writer: Tricia Acevedo Project: Compaq ProLiant ML530 Setup and Installation Guide Comments:
Part Number: 139006-002 File Name: e-ch4 Configuration and Utilities.doc Last Saved On: 6/12/00 4:14 PM
System Configuration Menu
The following options are available from the System Configuration Utility
menu:
■ Configure Hardware
■ Power-On Defaults
■ System Partition
■ Configuration Backup
Configuring Hardware
When you select the Configure Hardware menu, a screen with five steps is
displayed. Below is a listing of each step with a brief explanation.
Step 1: Important System Configuration
Information
This step provides an overview of the configuration process.
Step 2: Add or Remove Boards
Use this step to add or remove any boards from the configuration.
Step 3: View or Edit Details
Use this step to make necessary configuration changes.
IMPORTANT: If you edit a function or resource in Step 3, be sure also to review Step 4.
Step 4: Examine Required Switches
Find the appropriate board’s switch and jumper settings and adjust them to
match the settings displayed on the screen.
Step 5: Save and Exit
Use this step to save the configuration update when you have made changes.