ProLiant ML530 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
3-26 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: d-ch3 Installing Hardware Options.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:00 PM
10. Install the new processor/heatsink assembly:
a. Determine the correct processor orientation by observing the three pins on
the processor retaining bracket and the corresponding holes on the
processor/heatsink assembly.
b. Insert the processor/heatsink assembly into the processor socket (1).
11. Secure the processor locking lever (2).
CAUTION: To prevent possible server malfunction or damage to the equipment,
be sure to completely close the processor locking lever.
IMPORTANT: If the processor locking lever is not secured, the processor retaining
bracket will not close properly.
Figure 3-20: Installing the processor/heatsink assembly
and securing the processor locking lever