ProLiant ML530 Generation 2 Server Setup and Installation Guide

Server Features
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 1-7
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: b-ch1 Server Features.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 2:57 PM
System Monitoring
In HP ProLiant ML530 Generation 2 servers, the system is monitored by internal and
external LEDs, including:
• Component LEDs visible on the front of the server
— Power On/Standby button and LED
— Internal health
— External health
— Embedded NIC activity
— Hard drives
— UID (Unit Identification) LED and button
• Component LEDs visible on the rear of the server
— Power supplies
— Embedded NIC activity
— Hot-plug expansion slots (power and fault status)
— UID (Unit Identification) LED and button
• Component LEDs visible inside the server
— Processors
— Processor Power Modules (PPMs)
— Memory board
— Expansion slots (speed, power, and fault status)
— Fans
— Memory board interlock
— Thermal warning
• Diagnostic support through RBSU, the ROM, the health drivers, and
Insight Manager 7
For more information about system LEDs, see Appendix C, “System LEDs and
Switches.”