ProLiant ML530 Generation 2 Server Setup and Installation Guide

Server Configuration and Utilities
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 8-7
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:19 PM
• Hot-Plug Resources enables you to allocate additional resources for empty
PCI-X slots so adapters can be hot added.
• POST Speed Up minimizes downtime and accelerates the power-up sequence.
Disabling POST Speed Up enables a full memory test during each boot.
• POST F1 Prompt enables an F1 prompt for POST error messages. Disabling
this option enables you to bypass the F1 prompt.
• ROM Selection enables you to switch to a backup ROM image.
• Erase Non-volatile Memory enables you to reset the configuration settings to
their factory defaults.
• Set CPU Corrected enables you to indicate correction of a CPU failure.
• Wake On LAN enables you to enable or disable Wake On LAN support (PME).
• NMI Debug Button enables you to enable or disable the non-maskable interrupt
(NMI) caused by engaging the NMI switch.
• Custom POST Message enables you to set a custom message to be displayed
during POST.
• Processor Hyperthreading enables you to enable or disable the logical
processor in an Intel Xeon processor with Hyper-Threading technology.
Utility Language
The Utility Language enables you to set the display language for RBSU. The
following choices are available:
• English
• French
• Italian
• German
• Spanish
• Japanese