ProLiant ML530 Generation 2 Server Setup and Installation Guide

Cabling the Server
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 7-7
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: h-ch7 Cabling the Server.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:19 PM
Cabling SCSI Devices in the Removable Media Bay
The following illustration shows cable routing for a terminated multi-drop SCSI
cable from a SCSI device in the removable media bay to internal SCSI connector B
on the system board.
Figure 7-3: Cable routing of a SCSI device from the
removable media bay to internal SCSI connector B on
the system board