ProLiant ML530 Generation 2 Server Setup and Installation Guide

Installing the Tower Server
6-4 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: g-ch6 Installing the Tower Server.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:18 PM
Use the following figure and table to identify connectors on the rear panel of the
tower server.
Figure 6-2: Rear panel connectors and components
(tower server)
Table 6-1: Rear Panel Connectors and Components (Tower Server)
Item Description Item Description
1 Keyboard connector 10 Hot-plug power supply 1
2 Mouse connector 11 Hot-plug power supply bay 2 (redundant)
3 Serial connector A 12 Torx T-15 tool
4 Parallel connector 13 Unit Identification (UID) switch and LED
5 Embedded NIC connector (RJ-45) 14 USB connectors
6 Release latch 15 Video connector
7 VHDCI SCSI connector 16 Serial connector B
8 PCI-X Hot Plug expansion slots 17 Hot-plug power supply bay 3 (not used)
9 PCI-X non-hot-plug expansion slots
Note: Improved power supply performance ensures that a single power supply provides sufficient
power to the entire system. Complete redundancy can be achieved by installing only one additional
power supply.