ProLiant ML530 Generation 2 Server Setup and Installation Guide

Installing the Rack Server
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 5-23
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: f-ch5 Installing the Rack Server.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 3:17 PM
Use the following figure and table to identify connectors on the rear panel of the rack server.
Figure 5-17: Rear panel connectors and components
(rack server)
Table 5-2: Rear Panel Connectors and Components (Rack Server)
Item Description Item Description
1 Mouse connector 10 Hot-plug power supply bay 2 (redundant)
2 Serial connector A 11 Torx T-15 tool
3 Parallel connector 12 Unit Identification (UID) switch and LED
4 Embedded NIC connector (RJ-45) 13 USB connectors
5 Locking latch 14 Video connector
6 VHDCI SCSI connector 15 Serial connector B
7 PCI-X Hot Plug expansion slots 16 Hot-plug power supply bay 3 (not used)*
8 PCI-X non-hot-plug expansion slots 17 Keyboard connector
9 Hot-plug power supply 1
*Improved power supply performance ensures that a single power supply provides sufficient power
to the entire system. Complete redundancy can be achieved by installing only one additional power
supply.