ProLiant ML530 Generation 2 Server Setup and Installation Guide

Contents
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide xi
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: a-frnt.doc
Codename: Seattle Slew Part Number: 225579-002 Last Saved On: 1/8/03 2:56 PM
3-46 Removing the drive blank from the next available hot-plug hard drive bay .......... 3-58
3-47 Installing the HP universal hot-plug tape drive ...................................................... 3-59
3-48 Removing the media bay blanks (tower model) ..................................................... 3-61
3-49 Removing the removable media bay blank rails..................................................... 3-62
3-50 Affixing the removable media bay blank rails to a SCSI or IDE device ................ 3-62
3-51 Installing a SCSI or IDE device in the removable media bays (tower model) ....... 3-63
3-52 Cable routing of an IDE device from the removable media bay to the
secondary IDE connector on the system board....................................................... 3-65
3-53 Removing a CPU or I/O fan.................................................................................... 3-67
3-54 Removing a fan basket............................................................................................ 3-68
3-55 Extending the system tray....................................................................................... 3-68
3-56 Removing the drive air baffle ................................................................................. 3-69
3-57 Disconnecting cables from the CD-ROM drive...................................................... 3-69
3-58 Removing the CD-ROM drive................................................................................ 3-70
3-59 Installing a DVD drive in the CD-ROM drive bay................................................. 3-71
3-60 Cabling a DVD drive from the CD-ROM drive bay to the
primary IDE connector on the system board .......................................................... 3-72
3-61 Connecting an external device to the VHDCI SCSI connector .............................. 3-74
3-62 Connecting an external storage device to an expansion board ............................... 3-75
4-1 PCI-X expansion slots and buses.............................................................................. 4-3
4-2 Expansion slot speed LEDs ...................................................................................... 4-6
4-3 Internal expansion slot LEDs and PCI Hot Plug button ......................................... 4-10
4-4 External expansion slot LEDs................................................................................. 4-11
4-5 Powering down the slot with the port-colored PCI Hot Plug button ...................... 4-14
4-6 Releasing the expansion slot latch and removing the expansion slot cover............ 4-15
4-7 Locking the PCI retaining clip open ....................................................................... 4-15
4-8 Inserting a PCI Hot Plug expansion board.............................................................. 4-16
4-9 Securing the PCI retaining clip ............................................................................... 4-16
4-10 Powering down the slot with the port-colored PCI Hot Plug button ...................... 4-18
4-11 Locking the PCI retaining clip open ....................................................................... 4-19
4-12 Releasing the expansion board with the expansion board release handle............... 4-19
4-13 Removing a PCI Hot Plug expansion board from the server .................................. 4-20
5-1 Measuring with the rack template on the front of the rack ....................................... 5-5
5-2 Inserting cage nuts into the rack frame ..................................................................... 5-7
5-3 Inserting the rack rail assembly into the rack (other rack details are removed for
clarity)....................................................................................................................... 5-8
5-4 Releasing the rail compression lever ........................................................................ 5-9
5-5 Inserting screws to secure the rack rail assembly in the rack ................................. 5-10
5-6 Positioning the server rail on the chassis ................................................................ 5-11