ProLiant ML530 Generation 2 Memory Installation Guide

Error Messages
2-2 HP ProLiant ML530 Generation 2 Server Memory Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: c-ch2 Error Messages.doc
Codename: Seattle Slew Part Number: 279985-002 Last Saved On: 1/9/03 11:56 AM
Table 2-1: POST Error Messages
Error Code Audible
Beeps
Probable Source of
Problem
Action
207 - Invalid Memory
Configuration - DIMM X
unsupported. Only Registered
DDR DIMMs are Supported.
1 long,
1 short
Unregistered DIMMs Install registered PC
1600 ECC DDR
SDRAM DIMMs.
207 - Invalid Memory
Configuration - DIMM X
unsupported. Insufficient
Timings on DIMM.
1 long,
1 short
Insufficient DIMM
timings
Install registered PC
1600 ECC DDR
SDRAM DIMMs.
207 - Invalid Memory
Configuration - Mismatched
DIMMs within DIMM Bank.
Memory in Bank X Not Utilized.
1 long,
1 short
DIMMs within a bank
are mismatched or
missing.
Install correctly
matched DIMMs.
209 - Online Spare Memory
Configuration - Bank D is
invalid.
1 long,
1 short
Online spare bank is
configured incorrectly.
Be sure that DIMMs in
the online spare bank
are populated
correctly.
209 - Online Spare Memory
Configuration - No valid banks
for online spare.
1 long,
1 short
Only the online spare
bank is populated.
Install DIMMs in at
least bank A.
209 - Mirror Memory
Configuration - Single-Board
Mirror DIMMs do not match.
1 long,
1 short
Mirrored banks are not
populated identically.
Be sure mirrored
banks are populated
identically.