ProLiant ML530 Generation 2 Memory Installation Guide

Memory
HP ProLiant ML530 Generation 2 Server Memory Installation Guide 1-3
HP CONFIDENTIAL
Writer: Wendy Wing File Name: b-ch1 Memory.doc
Codename: Seattle Slew Part Number: 279985-002 Last Saved On: 1/9/03 11:54 AM
CAUTION: Electrostatic discharge can damage electronic components. Be sure you
are properly grounded before beginning any installation procedures.
The following warnings apply to in-rack operations only:
WARNING: Always begin by mounting the heaviest item on the bottom of the
rack. Continue to populate the rack from the bottom to the top.
WARNING: To reduce the risk of personal injury or equipment damage, always
be sure that the rack is adequately stabilized before extending a component
outside the rack. A rack may become unstable if more than one component is
extended for any reason. Extend only one component at a time.
WARNING: To reduce the risk of personal injury or equipment damage, be
sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizers are attached to the rack for single-rack installation.
• The racks are coupled in multiple-rack installations.
WARNING: To reduce the risk of personal injury from hazardous energy or of
damage to the equipment when working on energized servers with
precautions:
• Remove all watches, rings, and any other loose fitting jewelry.
• Avoid the use of conductive tools inside the server that could bridge live
parts.
CAUTION: For Compaq branded Series 7000 racks, you must install
highly ventilated rack door inserts to provide proper front-to-back airflow and cooling.
CAUTION: Be sure that your rack meets all recommended space and airflow
requirements for your server.