ProLiant ML530 Generation 2 Memory Installation Guide

Memory
1-2 HP ProLiant ML530 Generation 2 Server Memory Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: b-ch1 Memory.doc
Codename: Seattle Slew Part Number: 279985-002 Last Saved On: 1/9/03 11:54 AM
For more information specific to Advanced Memory Protection, refer to the
following resources:
• The white paper on Advanced Memory Protection on the HP website:
www.hp.com/servers/proliant/manage
• The Advanced Memory Protection multimedia on the Documentation CD
• The installation documentation that ships with option kits
• The hardware installation and configuration poster that ships with your server
• The hardware installation and configuration labels located on the inside of the
access panel of your server
For more information on configuring the memory through the ROM-Based Setup
Utility (RBSU), refer to the HP ROM-Based Setup Utility Users Guide on the
Documentation CD.
The following warnings apply to all procedures:
WARNING: The server is very heavy, up to 66 kg (146 lb). To reduce
the risk of personal injury or damage to the equipment:
• Remove all hot-plug power supplies to reduce the weight of the
server before lifting it.
• Observe local occupational health and safety requirements and
guidelines for material handling.
• Get help to lift and maneuver the server.
• Be sure the server casters are locked in place on tower models.
WARNING: To reduce the risk of personal injury or damage to the equipment:
• Heed all warnings and cautions throughout the installation instructions.
• Allow internal system components to cool before touching any surfaces.
• Be sure that the power to the server is turned off and that all power cords
are disconnected.
• Allow only qualified service personnel—those trained to work with
products capable of producing hazardous energy levels—to install options,
except when installing hot-plug power supplies or hard drives.