Microsoft Small Business Server 2000 Installation Instructions for Compaq Prosignia and ProLiant Servers

ManualsBrandsHP ManualsServerHP ProLiant ML370 Server

Microsoft Small Business Server 2000 Installation Instructions for Compaq Prosignia and ProLiant Servers 12

145Z-0301B-WWEN

Part 2: Installing and Configuring Modem and Network

Interface Controllers with Microsoft SBS 2000

The Microsoft SBS 2000 operating system may not contain the correct drivers for your modem(s)

and your network interface controller (NIC). To install and configure the modem(s) that are

identified by Microsoft SBS 2000 perform the steps in Task 1 located in Table 8. To install and

configure the NIC(s) not identified by Microsoft SBS 2000, perform the steps in Task 1 located in

Table 9.

Error! Not a valid bookmark self-reference.

√

Procedures Steps



Task 1:

Installing and configuring

modem(s) and the

appropriate driver(s)

If a modem is installed after Microsoft SBS 2000 installation completes, the

Hardware Wizard runs automatically.

1. Click Next when the Welcome to the Found New Hardware Wizard

window appears.

2. Search for a suitable driver for your device on the Install Hardware

Device Drivers window and click Next.

3. Select from the Optional search locations on the Locate Driver Files

window. Provide the OEM driver if it is located on a diskette and click

Next.

After the wizard completes the search, it displays the driver it found

for your modem.

4. Click Next to install the found driver.

5. Click Finish to complete the Found New Hardware Wizard. You

should now be able to use your modem with Microsoft SBS 2000.

Note: If during the Found New Hardware Wizard you are unable to

locate the appropriate driver for your modem, contact your modem

manufacturer or visit their website to locate the driver.

Table 9. Installing the correct NIC driver after operating system installation

√

Procedures Steps



Task 1:

Installing and configuring

network interface

controller(s) and the

appropriate driver(s)

If a network interface controller is installed after Microsoft SBS 2000

installation completes, the Hardware Wizard runs automatically.