HP ProLiant ML370 Generation 3 Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 3-11
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: d-ch03 Installing Hardware Options.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 12:45 PM
Table 3-7: System Board Components
Item Description Item Description
1 PPM slot 2 13 64-bit/100-MHz PCI-X expansion slot 6
(bus 6, 3.3-V signaling)
2 Processor socket 2 14 System identification switch (SW2)
3 Processor socket 1 15 System maintenance switch (SW1)
4 Redundant fan 2 connector 16 30-pin remote management
connector *
5 PPM slot 1 17 Power supply signal connector
6 System battery 18 Power supply connector
7 Redundant fan 4 connector 19 SCSI port 2
8 64-bit/100-MHz PCI-X expansion slot 1
(bus 2, 3.3-V signaling)
20 Fan cable connector
9 64-bit/100-MHz PCI-X expansion slot 2
(bus 2, 3.3-V signaling)
21 SCSI port 1
10 64-bit/100-MHz PCI-X expansion slot 3
(bus 10, 3.3-V signaling)
22 Diskette drive connector
11 64-bit/100-MHz PCI-X expansion slot 4
(bus 10, 3.3-V signaling)
23 IDE connector
12 64-bit/100-MHz PCI-X expansion slot 5
(bus 6, 3.3 -V signaling)
24 DIMM slots
* The server comes with Integrated Lights-Out remote management capability embedded on the
system board. The 30-pin remote management connector for the Remote Insight Lights-Out
Edition II board is provided if the server environment requires an upgrade for faster speeds.