HP ProLiant ML370 Generation 3 Setup and Installation Guide

Server Features
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide 1-11
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: b-ch01 Server Features.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:09 PM
Hot-Plug Power Supply
The server includes one 500-W hot-plug power supply with:
• 1+1 redundancy when a second 500-W hot-plug power supply is installed
• Auto-sensing input voltage range from 90 VAC to 264 VAC
Warranties
The server is backed by the following standard warranties:
• Three-Year, On-Site, Limited Global Warranty
• Pre-Failure Warranty
Three-Year, On-Site, Limited Global Warranty
HP covers the cost of all necessary parts and labor for onsite or carry-in service
during the specified warranty periods. Under the global warranty, product warranty
terms at the time of purchase are honored in any country where HP has a service
presence. This applies to customers who may purchase a product in one country, then
transfer it to another.
IMPORTANT: Customers moving HP products between certain countries or regions are
asked to provide information needed to ensure that HP is prepared to provide the required
level of warranty service in the destination country. For information on the HP Global Warranty
notification process, contact your authorized reseller or refer to
www.hp.com/support
Response time is based on commercially reasonable best efforts. In most cases, next
business day response is available. In some regions and under certain supplier
restraints, next business day response is not always possible. Contact your local HP
service organization for response times in your area or for information about
upgrading service response times for the server.