HP ProLiant ML370 Generation 3 Setup and Installation Guide

LED Indicators and Switches
E-16 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: m-appe LED Indicators and Switches.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:48 PM
System Maintenance Switch
The system maintenance switch (SW1) is a six-position switch that is used for system
configuration. The default setting for all six positions is Off. For the proper system
maintenance switch settings, refer to Table E-9.
Table E-9: System Maintenance Switch (SW1)
Position Description Settings
1 iLO security Off = iLO security enabled.
On = iLO security disabled
2 Configuration lock Off = System configuration can be
changed.
On = System configuration is locked
and cannot be modified.
3 Rack mount
indicator
Off = System is in a tower configuration.
On = System is in a rack-mounted
configuration.
4 Enable diskette
boot
Off = Booting from diskette is controlled
by RBSU.
On = Booting from diskette is enabled
and RBSU setting is overridden.
5 Password disable Off = Power-on password works
normally.
On = Power-on password is disabled.
6 Invalidate
configuration
Off = Normal
On = ROM treats system configuration
as invalid.