HP ProLiant ML370 Generation 3 Setup and Installation Guide

LED Indicators and Switches
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide E-13
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: m-appe LED Indicators and Switches.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:48 PM
Table E-7: System Board LEDs and Internal Health LED Status Combinations
System LED and Status Internal Health
LED Status
Means
Red
• Processor in socket X has failed.
• Processor has failed over to offline spare, if
the second processor is installed.
• Processor is not installed in socket X.
• ROM detects a failed processor during
POST.
Processor failure, socket X
(amber)
Amber Processor in socket X is in pre-failure condition.
Processor failure, both
sockets (amber)
Red
• Processor types do not match.
• Processor is not installed, but the
corresponding PPM is installed.
PPM failure, slot X
(amber)
Red
• PPM in slot X has failed.
• PPM X is not installed.
• PPM is not installed, but the corresponding
processor is installed.
Red
• DIMM in slot X has failed.
• DIMM has experienced a multi-bit error.
DIMM failure, slot X
(amber)
Amber
• DIMM has reached single-bit correctable
error threshold.
• DIMM in slot X is in pre-failure condition.
continued