HP ProLiant ML370 Generation 3 Setup and Installation Guide

Troubleshooting
D-14 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: l-appd Troubleshooting.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:43 PM
Table D-7: Problems After Initial Boot continued
Problem Possible Cause Possible Solution
Error occurs during
installation.
Follow the error information provided. If it is
necessary to reinstall, run the System Erase
Utility. Read the caution in this table. Refer to the
instructions in the Servers Troubleshooting Guide.
SmartStart fails
during installation.
CMOS is not cleared. Run the System Erase Utility. Read the caution in
this table. Refer to the instructions in the Servers
Troubleshooting Guide.
CAUTION: The System Erase Utility causes loss of all configuration information, as well
as loss of existing data on all connected hard drives. Before performing this operation,
refer to the Servers Troubleshooting Guide for information on running the System Erase
Utility.
continued