HP ProLiant ML370 Generation 3 Setup and Installation Guide

Installing the Rack Server
4-20 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch04 Installing the Rack Server.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:12 PM
Installing an Operating System
IMPORTANT: Before installing an operating system on a new server or previously
unconfigured boot drive, you must configure the server with RBSU.
To configure the server for the first time:
1. Power up the server. The system automatically launches RBSU.
2. When prompted, select a language.
3. Select the operating system you want to install on the server. A dialog box
displays, indicating that the system configuration is complete.
4. Press the F10 key to exit RBSU or press any other key to return to the RBSU
main menu.
5. Insert the SmartStart CD or the operating system installation CD.
NOTE: Grasp the CD from the edges, not the flat surfaces of the disc.
Figure 4-17: Inserting the CD into the rack server
NOTE: The CD-ROM drive may look different from the one shown in this chapter.