HP ProLiant ML370 Generation 3 Setup and Installation Guide

Installing the Rack Server
4-12 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: e-ch04 Installing the Rack Server.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 2:12 PM
5. Press the end tabs on both of the server rails to release the lock (1).
6. Slide the server all the way back into the rack (2).
Figure 4-9: Initializing the rail locks
7. Tighten the bezel thumbscrews to secure the server to the front of the rack.
Figure 4-10: Tightening the thumbscrews