HP ProLiant ML370 Generation 3 Setup and Installation Guide

Installing Hardware Options
3-64 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: d-ch03 Installing Hardware Options.doc
Codename: Dizzy Devil Part Number: 281992-002 Last Saved On: 12/3/02 12:45 PM
Installing Hot-Plug Fans
After installing the redundant fan cage, insert two of the hot-plug fans into the
redundant fan cage and one fan into the redundant slot on the fan cage along the
center wall.
1. Locate the two available slots on the redundant fan cage.
2. Slide one of the hot-plug fans into a fan cage slot and press down until the fan is
seated securely.
NOTE: Any hot-plug fan provided in the redundant hot-plug fan cage option kit can be
installed in any of the hot-plug fan slots. Fans are keyed to fit only one way in the slot.
3. Repeat step 2 to install a second hot-plug fan in the redundant fan cage.
Figure 3-54: Installing hot-plug fans in the redundant
fan cage