HP ProLiant DL/ML370 G6 Servers graphics card power cable kit installation instructions

A 150-W graphics card or a 225-W
graphics card
Item 150-W graphics card 225-W graphics
card
Cable 1 (P/N:
506302-001)
Only the 75-W 2x3-
pin connector is
connected.
Only the 150-W
2x4-pin connector
is connected.
Two 150-W graphics cards
Item Description
1 150-W graphics cards (2)
2 (Cable 2 [P/N: 509680-001]) 75-W 2x3-pin
connector
3 (Cable 1 [P/N: 506302-001]) 75-W 2x3-pin
connector
Three 150-W graphics cards
Three 150-W graphics cards (using Cable 2 [P/N: 509680-001])
A 150-W graphics card and a 225-W
graphics card
NOTE: In the illustration, only one configuration is
shown. The graphics cards and their respective cabling
options can be switched and installed in the other slot,
if necessary.
Item Description
1 225-W graphics card
2 Cable 1 (P/N 506302-001): 300-W graphics
card power cable with one 75-W 2x3-pin
connector and one 150-W 2x4-pin connector
Only the 150-W 2x4-pin connector is
connected.
3 150-W graphics card
4 Cable 2 (P/N: 509680-001): 300-W
graphics card power cable with three 75-W
2x3-pin connectors
Only one 75-W 2x3-pin connector is
connected.