Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

Rack Installation 2-11
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Tower-to-Rack Conversion Guide Comments:
Part Number: 201346-001 File Name: c-ch2 Installing.doc Last Saved On: 6/27/00 9:36 AM
2. Align the front screw holes in the slide rail and the mounting bracket.
3. Fasten the slide rail to the mounting bracket using three 8-32 x 1/4-inch
slotted screws (supplied). Adjust the inner slide to access the screw
holes through the slotted opening in the inner slide, then insert the
screws (
, , and ) as shown in Figure 2-4.
1
2
3
Figure 2-4. Securing the slide rail to the mounting bracket
4. Repeat steps 1 through 3 for the other slide rail and mounting bracket.