Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

Preparing the Server 1-13
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Tower-to-Rack Conversion Guide Comments:
Part Number: 201346-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/7/00 10:05 AM
Setting the Rack Configuration System Board
Switch
Switch 3 on the system board switch (SW1) is the rack configuration switch.
To enable this switch setting, set switch 3 to the on position, as shown in
Figure 1-10 and Figure 1-11. The location of the system board switch varies,
depending on the model purchased.
1 234
on
Figure 1-10. Setting the rack configuration system board switch (SW1)
on
1234
Figure 1-11 Setting the rack configuration system board switch (SW1)