Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

1-10 Compaq ProLiant ML350 Tower-to-Rack Conversion Guide
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Tower-to-Rack Conversion Guide Comments:
Part Number: 201346-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/7/00 10:05 AM
Removing the Locking Brackets
To remove the locking brackets:
1. Loosen the two thumbscrews located on the left side of the front
chassis
.
2. Slide the access panel back about 1.5 cm (0.5 inch), then pull the
access panel away from the chassis to remove it.
1
2
Figure 1-7. Removing the access panel