Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

1-8 Compaq ProLiant ML350 Tower-to-Rack Conversion Guide
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Tower-to-Rack Conversion Guide Comments:
Part Number: 201346-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/7/00 10:05 AM
Removing the Keylock Latch
If the server has a keylock latch, it must be removed before the server is
installed into the rack. If your server does not a have a keylock latch, skip this
step.
To remove the keylock latch:
1. Using a Torx T-15 screwdriver, remove the screw holding the latch in
place.
2. Pull the latch away from the chassis.
Figure 1-5. Removing the keylock latch