Compaq ProLiant ML350 Tower-to-Rack Conversion Guide

Preparing the Server 1-7
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Tower-to-Rack Conversion Guide Comments:
Part Number: 201346-001 File Name: b-ch1 Preparing the Server.doc Last Saved On: 7/7/00 10:05 AM
Removing the Feet
To remove the feet:
1. Turn the server upside down.
2. Remove the screw from the center of one of the feet.
3. Lift up the outside edge of the foot , then remove the foot .
3
2
1
Figure 1-4. Removing the feet
4. Repeat this procedure with the other three feet.