Compaq ProLiant ML350 Server General Troubleshooting Guide

Diagnostic Tools 4-33
Compaq Confidential – Need to Know Required
Writer: Susana Weinstein Salazar Project: Compaq Servers Troubleshooting Guide Comments:
Part Number: 161434-001 File Name: e-ch4 Diagnostic Tools.doc Last Saved On: 9/2/99 1:50 PM
Inspect Utility
The Inspect Utility provides configuration information such as the contents of
the operating system startup files, the current memory configuration, and the
ROM version. It operates with MS-DOS and in the MS-DOS emulation mode
of MS OS/2.
To Run the Inspect Utility
1. Turn the server off and then back on again. Press F10 when the cursor
appears in the upper right corner of the screen.
At the main menu, select Diagnostics and Utilities.
2. Press Enter.
3. Select Inspect Computer and press Enter.
If the Compaq Diagnostics diskette is installed on the hard drive, the
Inspect main menu displays.
If the Compaq Diagnostics diskette is not installed on the hard drive,
System Configuration prompts you to insert the Diagnostics diskette
in drive A.
4. Follow the instructions. The first time that the Inspect Utility displays,
indicate that you want to run Inspect by selecting Entire System and
press
Enter.
Printing the Inspect Listing
Select Print on the Inspect screen to print a copy of the Inspect listing. Keep a
copy of the listing with each server for later reference.