Compaq ProLiant ML350 933 Upgrade

Compaq ProLiant ML350
2 of 2 Rev. 0.41
Upgrade Path to the 933-MHz ProLiant ML350 Server
The Pentium III 933-MHz Processor Option Kit is supported on the 600-, 667-, and
733-MHz servers, allowing customers an easy upgrade path.
Note
When upgrading to a 933-MHz system, you do not have to change the System
I/O Board; however, you must run ROMPaq to upgrade the ROM.
Upgrade Options
Table 2 lists the upgrade option and spares kits associated with this processor. Refer
to TechInfo for a complete list of options and part numbers.
Table 2: Option and Spare Part Numbers for the 933-MHz Upgrade
Description Part Number
933-MHz/133-MHz FSB Pentium III 256K
Processor Option Kit (w/Processor and
VRM)
161086-B21
933-MHz/133-MHz FSB Pentium III 256K
Processor Spares Kit
196628-001
Software Supported
The 933-MHz server supports the same operating systems as the 600-, 667-, and
733-MHz model servers.
Service Considerations
The Pentium III Slot 1 processor cannot be down-clocked; therefore, all processors
must use the same frequency. Compaq does not support mixing processor
frequencies.
During POST, each processor and its initialization frequency is displayed. If POST
detects processors of unlike frequency, ROM halts the system.
Important Notes
!
Important
Class B Regulatory Information—Your server currently complies with the FCC
Class B requirements for digital devices. To maintain compliance with Class B
regulations, you must install the enclosed material according to the instructions
for this upgrade kit. Failure to follow these instructions may void the user’s
authority to operate the equipment.