Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

Managing Clusters 4-9
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Comments: Part Number: 223094-001 File Name: e-ch4 Managing Clusters.doc Last Saved On: 12/27/00 10:32 AM
The Quick Install procedure automatically installs the support needed for
Compaq Insight Manager XE. On the Management CD, the package that
provides this support is
nscccm and is part of the Compaq Management Agents
and Tools for Servers for the SCO UnixWare 7 NonStop Clusters portion of
the CD.
For additional information, refer to the Compaq Insight Manager XE User
Guide included on the Management CD.
NonStop Clusters Verification Utility
NonStop Clusters Verification Utility (NSCVU) validates Compaq ProLiant
Clusters for SCO UnixWare 7 and their components. This utility reports
information about the configuration of a newly installed cluster, providing
cluster-wide information as well as node-specific information and volume
information.
The Quick Install procedure automatically installs the NSCVU. On the
Management CD, the package that provides this support is
nscvu and is part of
the Compaq Management Agents and Tools for Servers for SCO UnixWare 7
NonStop Clusters portion of the CD. For more information, see the description
of the Quick Install CDs in Chapter 1, “Clustering Overview.”
UPS-Initiated Shutdown
The Quick Install procedure automatically installs the UPS software. On the
Management CD, the package that provides this support is
nscups and is part of
the Compaq Management Agents and Tools for Servers for SCO UnixWare 7
NonStop Clusters portion of the CD.
Use UPSs with Compaq ProLiant Clusters to minimize system downtime in
the event of power loss. Cable the UPSs to enable the cluster to be cleanly shut
down before the UPS battery backup is exhausted. The UPS-initiated
shutdown can minimize data loss and improve cluster reboot speed when
power returns.
A monitoring process running within the cluster provides the UPS-initiated
shutdown. A simple configuration file controls this monitoring process.