Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

4-4 Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

Compaq Confidential – Need to Know Required

Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

Comments: Part Number: 223094-001 File Name: e-ch4 Managing Clusters.doc Last Saved On: 12/27/00 10:32 AM

Event Processing Subsystem

The Event Processing Subsystem (EPS) is installed during cluster installation.

Use the EPS to configure actions and notifications based on system messages

(

syslogd). See the SCO UnixWare 7 NonStop Clusters System Administrator’s

Guide for more information.

NonStop Clusters Management Suite

The NonStop Clusters Management Suite (NCMS) is installed as part of SCO

UnixWare 7 NonStop Clusters and includes:

■ Config Manager

■ ServerNet™ Manager

■ Keepalive Manager

■ Keepalive Configuration Manager

■ Samview

Start NCMS by entering the

ncms command at a command line prompt or by

selecting an application from the clustering entry in the SCOadmin

management program. Each NCMS application includes online help for each

screen, available from Help on the menu bar.

Config Manager

The SCO UnixWare 7 NonStop Clusters Configuration Manager provides a

graphical user interface to configure simple network management protocol

(SNMP) agents, the EPS, and Compaq Insight Manager support. See the

NCMS Configuration Manager help subsystem for additional information.

ServerNet Manager

The SCO UnixWare 7 NonStop Clusters ServerNet Manager provides a

graphical user interface to manage the ServerNet I SAN. The ServerNet

Manager displays the status of ServerNet I connections as well as advanced

ServerNet I configuration information. The ServerNet Manager shows all

interconnects as disabled on Ethernet cluster interconnects.

NOTE: The ProLiant ML350 cluster does not use the ServerNet interconnect, and the

ServerNet Manager application cannot be used.