Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

4-2 Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Comments: Part Number: 223094-001 File Name: e-ch4 Managing Clusters.doc Last Saved On: 12/27/00 10:32 AM
SCO UnixWare 7 NonStop Clusters
Management Software
The single-system image of the Compaq ProLiant cluster makes managing a
cluster similar to managing a single-node, noncluster UnixWare 7 system. The
standard SCO documentation is useful for performing the management tasks.
Cluster concepts and cluster-specific system administration tasks are
documented in the NonStop Clusters Documentation topic in the SCO
UnixWare 7 NonStop Clusters System Administrator’s Guide.
This guide is available in the SCOhelp online documentation set, which you
can access in the following ways:
■ Click the book-and-question-mark icon in the toolbar on the UnixWare
Desktop to access SCOhelp. A browser displays the main SCOhelp list
of topics.
■ Type scohelp at the command line of a desktop terminal (dtterm) to access
SCOhelp. A browser displays the main SCOhelp list of topics.
■ Use the following URL to access SCOhelp remotely when the cluster is
connected to the public network:
http://clustername:457
Substitute the name of your cluster or its cluster virtual IP (CVIP)
address for clustername. The browser displays the main SCOhelp list of
topics.