Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

3-6 Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Comments: Part Number: 223094-001 File Name: d-ch3 Installing Cluster Software.doc Last Saved On: 12/27/00 10:31 AM
Installing the Cluster Using Quick
Install CDs
Before beginning the software installation, be sure to have the Quick Install
planning worksheets on hand and the following items available:
■ Cluster name and Cluster Virtual IP (CVIP) address
■ Node 1 hostname and IP address for the public network
■ Node 2 hostname and IP address for the public network
■ Netmask for the public network
■ Node 1 hostname and IP address for the cluster interconnect
Default values of node1-ic and 10.1.0.1 are provided during the
installation.
■ Node 2 hostname and IP address for the cluster interconnect
Default values of node2-ic and 10.1.0.2 are provided during installation.
IMPORTANT: The public network IP address for node 1 and node 2 and the CVIP address
must be on the same Ethernet subnet. The default router must be on the public network
subnet. The cluster interconnect IP addresses for node 1 and node 2 must be on a
different subnet from the public network.
■ Netmask for the cluster interconnect interfaces
A value of 255.255.255.0 is provided during installation.
■ UnixWare and NonStop Clusters licenses and an add-on Mirroring
Option license or ODM license must be added if the UnixWare licenses
do not include mirroring.
■ Passwords and system owner information
■ NonStop Clusters simple network management protocol (SNMP) agent
configuration information
■ One formatted diskette