Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350

3-2 Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Compaq Confidential – Need to Know Required
Writer: Rachel Williams Project: Compaq ProLiant Clusters for SCO UnixWare 7 U/200 Quick Install Guide for the Compaq ProLiant ML350
Comments: Part Number: 223094-001 File Name: d-ch3 Installing Cluster Software.doc Last Saved On: 12/27/00 10:31 AM
Understanding Preinstallation Tasks and
Considerations
Before you begin the software installation, assemble the hardware for the
cluster, fill out the Quick Install planning worksheets in Appendix B of this
guide, and have four formatted diskettes on hand. Read through this chapter to
become familiar with the installation procedures as you fill out the worksheets.
Default Quick Install Settings
Table 3-1 lists the default settings used during the Quick Install installation
procedure. These parameters can be modified after installation is complete by
running the International Settings Manager in the System folder of the
SCOadmin system administration tool.
Table 3-1
Quick Install Default Settings
Parameter Default
Locale C Standard
Keyboard United States C
Code set C
Time zone Configurable to any U.S. time zone