ProLiant ML350 Generation 4 Reference and Troubleshooting Guide

218 Reference and Troubleshooting Guide
207-Invalid Memory Configuration - Single channel memory... ...............................................220
207-Invalid Memory Configuration - Unsupported DIMM in Socket X ...................................221
221
214-Processor PPM Failed, Module X.......................................................................................
212-Processor Failed, Processor X.............................................................................................
221
Possible Cause: Memory failure detected.
201-Memory Error
Audible Beeps: None
Action: Run Insight Diagnostics ("HP Insight Diagnostics" on page 101) and
replace failed components as indicated.
Audible Beeps: None
Possible Cause: Memory failure detected.
101
203-Memory Address Error
Action: Run Insight Diagnostics ("HP Insight Diagnostics" on page ) and
replace failed components as indicated.
207-Memory Configuration Warning - DIMM In Socket x does not
have Primary Width of 4 and only supports standard ECC
Advanced ECC does not function when mixing DIMMs with Primary Widths of x4 and x8.
Audible Beeps: 1 long, 1 short, or none
Possible Cause: Installed DIMMs have a primary width of x8.
Action: Install DIMMs that have a primary width of x4 if Advanced ECC
memory support is required.