HP ProLiant ML350 Generation 3 Server Setup and Installation Guide

Troubleshooting
6. Check for the following “normal power up sequence” to be sure that your system
meets the minimal hardware requirements and is powered up under normal
operation:
a. The front panel Power On/Standby LED turns green.
b. The fans start up.
c. The server ROM initializes the server in the following sequence:
— Video initialization—The HP initialization screen is displayed.
— Processor initialization
— Memory test
— Memory initialization
— Diskette drive
— SCSI devices (if applicable)
— ATA devices (if applicable)
— Option ROM
d. The operating system loads to complete the boot process.
If the problem persists, continue with the following section, “Diagnosis Steps.”
D-4 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: j-appd Troubleshooting.doc
Codename: Steel Venom Part Number: 316354-001 Last Saved On: 12/9/02 8:30 AM