HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide

Removal and Replacement Procedures
Removable Media Device
To remove a removable media device:
1. Complete the preparation procedures. Refer to “Preparation Procedures” earlier in this
chapter.
2. Open the bezel door. Refer to “Bezel Door (Tower Model Only)” earlier in this chapter.
3. Remove the access panel. Refer to “Access Panel” earlier in this chapter.
4. Disconnect the cables from the back of the removable media device and the system
board.
Figure 2-21: Disconnecting the removable media device cables
2-24 HP ProLiant ML350 Generation 3 Server Maintenance and Service Guide